1. Safety
   • Warning Symbols
   • General Precautions
   • Guard Doors
     
2. Machine Overview
   
   • Basic Operation
   • Specifications
     
3. Sequence of Operation
   
   • Conveyor
   • Accumulator
   • Main Machine
4. Status Indicators
   
   • Beacon Stack Lights
   • Audible Alarms
5. Operator Control Station (OCS)
   
   • Emergency Stop Buttons
   • PanelView Graphic Interface
   • Screens & Functions
6. System Start-up
   
   • Preparing Glue System
   • Loading Trays
   • Start-up Procedures
7. Alarm, Error Recovery Procedure
   
   • Automatic Fault Detection
   • Shutdown Procedures
   • Removing Damaged Items
   • Troubleshooting Guide
8. Operator Maintenance
   
   • Housekeeping
   • Corrugated Storage
   • Washdown
9. Changeover Procedure
   
   • Sample Adjustment
   • Changeover Sheets
   • Finger Set-up
   • General Set-up and Checks

The objective of the Machine Operation Training is to familiarize personnel with the operation, procedures and terminology of the Schneider supplied equipment. Trainees will be able to correctly start up and shut down the equipment. Trainees will also be able to identify faults and jams as well as how to rectify these situations and restart the equipment. This training should be expected to last 2 - 4 hours.

For the purpose of clarity and thoroughness, Machine Operation Training classes should be limited to five persons per class. Training includes both classroom and “hands on” at the machine.  Training material is developed specifically for your equipment.  A hardcopy of the training handbook is provided for each training participant.

1. Troubleshooting Procedures
   • PLC
   • Air Circuit
   • Message Logic
     
2. Machine Blue Print Documentation
   
   • Accumulator/Laner
   • Main Machine
     
3. Manual Overview
   
   • Introduction
   • Warranty
   • Highlights
4. Bill of Materials / Spare Parts
   
   • BOM
   • Recommended Spare Parts List
   • Locating Part Numbers
5. Periodic Maintenance
   
   • Preventive
   • Schneider Programs
   • Schedules
6. PLC / Program
   
   • Program Example

The objective of the Technicians Training is to familiarize technicians with the various systems utilized on the Schneider supplied equipment. In addition to understanding how to operate the Schneider supplied equipment, the technicians will be able to identify problems, troubleshoot systems, perform changeovers and replace components. As a prerequisite Technicians should have experience in troubleshooting mechanical and pneumatic systems, as well as experience in identifying components in PLC based machinery. This training should be expected to last 6 - 8 hours.

For the purpose of clarity and thoroughness, Technician Training classes should be limited to five persons per class. Training includes both classroom and “hands on” at the machine.  Training material is developed specifically for your equipment.  A hardcopy of the training handbook is provided for each training participant.